{"product_id":"adafruit-feather-rp2040-adalogger-8mb-flash-with-microsd-card-stemma-qt-qwiic","title":"Adafruit Feather RP2040 Adalogger - 8MB Flash with microSD Card - STEMMA QT \/ Qwiic","description":"\u003cp\u003eThis is the \u003ca title=\"Adafruit\" href=\"\/hi\/collections\/adafruit\"\u003eAdafruit\u003c\/a\u003e \u003cstrong\u003eFeather RP2040 Adalogger\u003c\/strong\u003e - our take on an 'all-in-one' RP2040 data-logger (or data-reader) with built-in USB, \u003ca href=\"\/hi\/products\/2000mah-3-7v-lipo-battery\"\u003eLiPo battery\u003c\/a\u003e charging, and a \u003ca href=\"\/hi\/products\/sandisk-microsd-card-class-10-a1\"\u003emicroSD\u003c\/a\u003e holder ready to rock!\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/hi\/collections\/adafruit-feather\"\u003eWe have other boards in the Feather family, check'em out here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe RP2040 Adalogger is the same size and shape as a Feather and is intended to make your next data logging or data reading project super easy. Micro SD card socket wired for SPI or SDIO? Yes! STEMMA QT \/ Qwiic connector for fast I2C? Of course! \u003ca href=\"\/hi\/collections\/adafruit-neopixels\"\u003eNeopixel\u003c\/a\u003e? It's a-glowin' This board will work excellently with Arduino or CircuitPython\/MicroPython for any data recording\/retrieving projects.\u003c\/p\u003e\n\u003cp\u003eAt the Feather's heart is an RP2040 chip, clocked at 133 MHz and at 3.3V logic, the same one used in the \u003ca href=\"\/hi\/collections\/pico\"\u003eRaspberry Pi Pico\u003c\/a\u003e. This chip has a whopping 8MB of onboard QSPI FLASH and 264K of RAM! This makes it great for buffering and processing data before writing it to the SD card.\u003c\/p\u003e\n\u003cp\u003eTo make it easy to use for portable projects, we added a connector for any of our 3.7V Lithium polymer batteries and built-in battery charging. You don't need a battery, it will run just fine straight from the \u003ca href=\"\/hi\/products\/usb-a-to-usb-c-cable-1m\"\u003eUSB Type C\u003c\/a\u003e connector. But, if you do have a battery, you can take it on the go, then plug in the USB to recharge. The Feather will automatically switch over to USB power when it's available.\u003c\/p\u003e\n\u003cp\u003eComes assembled and tested, with some headers. You'll need a \u003ca href=\"\/hi\/products\/antex-xs25-soldering-iron-uk-plug\"\u003esoldering iron\u003c\/a\u003e to attach the header for installation onto your Feather. Stacking headers will let you put another FeatherWing on top. \u003cstrong\u003eLipoly battery, MicroSD card, and USB cable not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMeasures 2.0\" x 0.9\" x 0.28\" (50.8mm x 22.8mm x 7mm) without headers soldered in\u003c\/li\u003e\n\u003cli\u003eLight as a (large?) feather - 6.3 grams\u003c\/li\u003e\n\u003cli\u003eRP2040 32-bit Cortex M0+ dual core running at ~133 MHz @ 3.3V logic and power\u003c\/li\u003e\n\u003cli\u003e264 KB RAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 MB SPI FLASH\u003c\/strong\u003e chip for storing files and CircuitPython\/MicroPython code storage. No EEPROM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTons of GPIO! 21 x GPIO pins with following capabilities:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour \u003c\/strong\u003e12-bit ADCs (one more than Pico)\u003c\/li\u003e\n\u003cli\u003eTwo I2C, Two SPI, and two UART peripherals, we label one for the 'main' interface in standard Feather locations\u003c\/li\u003e\n\u003cli\u003e16 x PWM outputs - for servos, LEDs, etc\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in 200mA+ lipoly charger\u003c\/strong\u003e with charging status indicator LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin #13 red LED \u003c\/strong\u003efor general purpose blinking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB NeoPixel\u003c\/strong\u003e for full-color indication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicroSD card holder\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor adding as much storage as you could possibly want for reading or writing. Connected to the 'second' SPI port on pins 18, 19, 20 and card select on 23. Optional card detect line can be connected to pin 15. For advanced hackers who want to use 4-bit SDIO, we connect DAT1 and DAT2 to 21 and 22 - note we \u003cem\u003edo not\u003c\/em\u003e have Arduino or CircuitPython code for this mode.\u003c\/li\u003e\n\u003cli\u003eOn-board \u003cstrong\u003eSTEMMA QT connector\u003c\/strong\u003e that lets you quickly connect any Qwiic, STEMMA QT or Grove I2C devices with no soldering!\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoth Reset button and Bootloader select button for quick restarts \u003c\/strong\u003e(no unplugging-replugging to relaunch code)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Type C connector \u003c\/strong\u003elets you access built-in ROM USB bootloader and serial port debugging\u003c\/li\u003e\n\u003cli\u003e3.3V Power\/enable pin\u003c\/li\u003e\n\u003cli\u003e4 mounting holes\u003c\/li\u003e\n\u003cli\u003e12 MHz crystal for perfect timing.\u003c\/li\u003e\n\u003cli\u003e3.3V regulator with 500mA peak current output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-feather\/overview\" title=\"Introducing Adafruit Feather\"\u003eIntroducing Adafruit Feather (Guide)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Adafruit Feather RP2040 Adalogger\u003c\/li\u003e\n\u003cli\u003e2x Header strips\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":50847299600657,"sku":"ADA5980","price":14.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6285\/6209\/files\/adafruit-feather-rp2040-adalogger-8mb-flash-with-microsd-card-stemma-qt-qwiic-adafruit-ada5980-42527124357315.jpg?v=1735210443","url":"https:\/\/abcd3032.myshopify.com\/hi\/products\/adafruit-feather-rp2040-adalogger-8mb-flash-with-microsd-card-stemma-qt-qwiic","provider":"Tayyab Zak","version":"1.0","type":"link"}