{"product_id":"usb-c-cdc-serial-sh-with-cable","title":"USB-C CDC Serial SH (with cable)","description":"\u003cp\u003eThis USB-C CDC Serial Adaptor from \u003ca href=\"\/hi\/collections\/8086\"\u003e8086\u003c\/a\u003e plugs directly into the dedicated UART port on the \u003ca href=\"\/hi\/products\/raspberry-pi-5\"\u003eRaspberry Pi 5\u003c\/a\u003e (using the supplied JST cable) providing quick serial console access via a \u003ca href=\"\/hi\/products\/usb-a-to-usb-c-cable-1m\"\u003eUSB-C cable\u003c\/a\u003e (not included).\u003c\/p\u003e\n\u003cp\u003eThe adapter uses a 3-pin JST-SH connector and \u003cstrong\u003ecomes with a 10cm cable\u003c\/strong\u003e (compatible with 1mm pitch JST-SH) - we stock more sizes of \u003ca href=\"\/hi\/products\/jst-sh-to-jst-sh-3-pin-cable\"\u003eJST-SH to JST-SH cable here\u003c\/a\u003e. 3-pin cables for the \u003ca href=\"\/hi\/products\/raspberry-pi-debug-probe\"\u003eRaspberry Pi Debug Probe\u003c\/a\u003e can also be used.\u003c\/p\u003e\n\u003cp\u003eThe Serial console is enabled by default on Raspberry Pi OS (Bookworm) elsewhere it can normally be enabled by adding \u003cstrong\u003eenable_uart=1\u003c\/strong\u003e to the config.txt file in the boot partition. The IC is used in the adapter enumerates as a Communication Device Class (CDC) device which modern (Win10\/Linux\/Mac OS X) operating systems have built in drivers for.\u003c\/p\u003e\n\u003cp\u003eWhen using with a Raspberry Pi 5 in an \u003ca href=\"\/hi\/products\/raspberry-pi-5-case\"\u003eofficial case\u003c\/a\u003e the cable can exit in the gap at the side of the Ethernet port.\u003c\/p\u003e\n\u003cp\u003eThis board \u003cstrong\u003ecan only be used with systems using 3.3V\u003c\/strong\u003e, connecting to those using higher\/lower voltages may result in damage.\u003c\/p\u003e\n\u003ch2\u003ePinout\u003c\/h2\u003e\n\u003ctable width=\"350\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"108\"\u003e\u003cstrong\u003ePinout\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"242\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTX\u003c\/td\u003e\n\u003ctd\u003eTransmit (connect to remote RX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003ctd\u003eGround\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRX\u003c\/td\u003e\n\u003ctd\u003eReceive (connect to remote TX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eBaud Rates\u003c\/h2\u003e\n\u003cp\u003eThe following baud rates are supported:\u003c\/p\u003e\n\u003ctable width=\"357\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"179\"\u003e\u003cstrong\u003eBaud rate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"178\"\u003e\u003cstrong\u003eMiss rate (%)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2400\u003c\/td\u003e\n\u003ctd\u003e0.16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4800\u003c\/td\u003e\n\u003ctd\u003e0.16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e9600\u003c\/td\u003e\n\u003ctd\u003e0.04\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e19200\u003c\/td\u003e\n\u003ctd\u003e0.04\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e38400\u003c\/td\u003e\n\u003ctd\u003e0.16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e57600\u003c\/td\u003e\n\u003ctd\u003e0.16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e115200\u003c\/td\u003e\n\u003ctd\u003e0.16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e230400\u003c\/td\u003e\n\u003ctd\u003e0.16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e460800\u003c\/td\u003e\n\u003ctd\u003e0.79\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1700000\u003c\/td\u003e\n\u003ctd\u003e0.84\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2300000\u003c\/td\u003e\n\u003ctd\u003e0.62\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3400000\u003c\/td\u003e\n\u003ctd\u003e0.84\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x USB-C CDC Serial SH board\u003c\/li\u003e\n\u003cli\u003e1x 10cm JST-SH cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5 and case not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"8086","offers":[{"title":"Default Title","offer_id":50847437259025,"sku":"105884","price":4.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6285\/6209\/files\/usb-c-cdc-serial-sh-with-cable-8086-105884-41901256474819.jpg?v=1735213343","url":"https:\/\/abcd3032.myshopify.com\/hi\/products\/usb-c-cdc-serial-sh-with-cable","provider":"Tayyab Zak","version":"1.0","type":"link"}