{"product_id":"usb-power-switch-dual","title":"USB Power Switch (Dual)","description":"\u003cp\u003eTurn two of your USB devices on\/off using a remote switch or a \u003ca href=\"\/hi\/collections\/raspberry-pi-store\"\u003eRaspberry Pi\u003c\/a\u003e, \u003ca href=\"\/hi\/collections\/arduino-store\"\u003eArduino\u003c\/a\u003e and other \u003ca href=\"\/hi\/collections\/adafruit-development-boards\"\u003emicrocontrollers\u003c\/a\u003e! This is a dual-USB version of our popular \u003ca href=\"\/hi\/products\/usb-power-switch-module\"\u003eUSB Power Switch Module\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003eThis module enables power to turn two USB devices on\/off via a USB power switch (MOSFET). Power goes IN via the micro-USB side and OUT via the dual USB Type-A socket (power for both sockets is toggled on\/off together).\u003c\/p\u003e \u003cp\u003eThe maximum current rating for the switch is 2.5A shared across both ports. The onboard chip used is a SiP32508\/9\u003c\/p\u003e \u003cp\u003eA \u003ca href=\"\/hi\/products\/usb-to-micro-usb-cable-0-5m\"\u003emicro-USB cable\u003c\/a\u003e or \u003ca href=\"\/hi\/products\/usb-a-to-usb-c-cable-1m\"\u003eUSB-C cable\u003c\/a\u003e may be required \u003cstrong\u003e(not included)\u003c\/strong\u003e.\u003c\/p\u003e \u003ch2\u003eConfiguration\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eSupplied with the PD (pull down) resistor set (Normally off).\u003c\/li\u003e \u003cli\u003eConnectors on top for GND \/ EN \/ 5V\u003c\/li\u003e \u003cli\u003eWhen the EN pin is connected to \u0026gt;2V (5V max) power to the device is turned on.\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eExample Usage\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eSimple toggle\/slide switch at the end of a (long) cable, connecting 5V to EN to turn on.\u003c\/li\u003e \u003cli\u003eRaspberry Pi\/Arduino - Connect the GPIO pin to EN (and GND to GND) set the GPIO pin to output, and turn the pin on to enable power.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThe USB Power Switch can be used to control power for many USB-powered devices such as Raspberry Pi Zero, Chromecasts, etc.\u003c\/p\u003e \u003ch2\u003ePlease Note\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eOnly for use with 5V supplies and devices\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Using anything else may damage your power supply\/charger\/USB devices and the USB Power Switchboard\u003c\/li\u003e \u003cli\u003eUSB data lines are connected at all times\u003c\/li\u003e \u003cli\u003ePCB colour may vary\u003c\/li\u003e \u003cli\u003eRaspberry Pi\/USB Power Monitor\/Cables not included.\u003c\/li\u003e \u003c\/ul\u003e","brand":"8086","offers":[{"title":"Default Title","offer_id":50847637668113,"sku":"105499","price":3.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6285\/6209\/files\/usb-power-switch-dual-the-pi-hut-105499-40648231125187.jpg?v=1735217095","url":"https:\/\/abcd3032.myshopify.com\/hi\/products\/usb-power-switch-dual","provider":"Tayyab Zak","version":"1.0","type":"link"}