{"product_id":"waveshare-rp2350-plus","title":"Waveshare RP2350 Plus","description":"\u003cp\u003eWho doesn't want a Pico 2 with a few extra features?! The RP2350 Plus is a board inspired by the \u003ca title=\"Raspberry Pi Pico 2\" href=\"\/hi\/products\/raspberry-pi-pico-2\"\u003eRaspberry Pi Pico\u003c\/a\u003e, built around the Raspberry Pi RP2350A dual-core microcontroller. It has the same dual-core Arm Cortex-M33 processor and a dual-core Hazard 3 RISC-V processor, with clock speeds up to 150 MHz. The board includes 520KB of SRAM and 4MB of onboard Flash memory, which gives you plenty of resources for various projects.\u003c\/p\u003e\n\u003cp\u003eTo get you powered up, there is a \u003ca title=\"USB-A to USB-C Cable\" href=\"\/hi\/products\/usb-a-to-usb-c-cable-1m\"\u003eUSB Type-C\u003c\/a\u003e connector, and one of the extra features that the Pico 2 doesn't have is a lithium battery recharge\/discharge header, which is very useful for a project that is on the go! The MP28164 DC-DC chip is a \u003cspan\u003ehigh-efficiency, low-quiescent current buck-boost\u003c\/span\u003e converter that can supply a maximum 2A load current. The board is compatible with most of the \u003ca title=\"Raspberry Pi Pico Accessories \u0026amp; Add Ons\" href=\"\/hi\/collections\/pico\"\u003eRaspberry Pi Pico add-on modules\u003c\/a\u003e (Just when you were wondering if you could use them with it)\u003c\/p\u003e\n\u003cp\u003eWith 26 multi-function GPIO pins, the Plus provides flexibility for various configurations. It supports multiple interfaces, including 2 SPI, 2 I2C, 2 UART, 4 12-bit ADC channels, and 16 controllable PWM channels. The plus is compatible with C\/C++ and MicroPython. It has a comprehensive SDK, development resources, and tutorials to assist you in getting up and running!\u003c\/p\u003e\n\u003cp\u003eThis is available in two versions: one without a pin header and one with pre-soldered pin headers. \u003cstrong\u003ePlease select which one you want before adding it to your cart!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: this board uses a tiny\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMX1.25\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003econnector for LiPo power.\u003c\/strong\u003e\u003cspan\u003e Most LiPo batteries on the market (including ours) use a larger JST fitting. We do not yet stock batteries with an MX1.25 connector, however, you can customise your battery with \u003c\/span\u003e\u003ca title=\"1.25mm Pitch 2-pin Cable Matching Pair - 40cm long (Molex PicoBlade Compatible)\" href=\"\/hi\/products\/adafruit-1-25mm-pitch-2-pin-cable-matching-pair-40cm-long\"\u003eone of our 1.25mm pitch cables\u003c\/a\u003e\u003cspan\u003e to make a compatible battery yourself (assuming you have the ability, knowledge and tools to do this safely).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRP2350A microcontroller chip designed by \u003ca title=\"Raspberry Pi Store\" href=\"\/hi\/collections\/raspberry-pi-store\"\u003eRaspberry Pi\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard 3 RISC-V processor, flexible clock running up to 150 MHz\u003c\/li\u003e\n\u003cli\u003e520KB of SRAM, and 4MB of onboard Flash memory\u003c\/li\u003e\n\u003cli\u003eType-C connector, keeps it up to date, easier to use\u003c\/li\u003e\n\u003cli\u003eLithium battery recharge\/discharge header, suitable for mobile devices\u003c\/li\u003e\n\u003cli\u003eDC-DC chip MP28164, high efficiency DC-DC buck-boost chip, maximum 2A load current\u003c\/li\u003e\n\u003cli\u003eCastellated module allows soldering directly to carrier boards\u003c\/li\u003e\n\u003cli\u003eUSB 1.1 with device and host support\u003c\/li\u003e\n\u003cli\u003eLow-power sleep and dormant modes\u003c\/li\u003e\n\u003cli\u003eDrag-and-drop programming using mass storage over USB\u003c\/li\u003e\n\u003cli\u003e26x multi-function GPIO pins\u003c\/li\u003e\n\u003cli\u003e2x SPI, 2x I2C, 2x UART, 4x 12-bit ADC, 16x controllable PWM channels\u003c\/li\u003e\n\u003cli\u003eAccurate clock and timer on-chip\u003c\/li\u003e\n\u003cli\u003eTemperature sensor\u003c\/li\u003e\n\u003cli\u003eAccelerated floating-point libraries on-chip\u003c\/li\u003e\n\u003cli\u003e12x Programmable I\/O (PIO) state machines for custom peripheral support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's on Board\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/RP2350-Plus_contents.jpg?v=1733914901\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED\u003c\/strong\u003e\u003cbr\u003eUser LED (not power indicator)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUSB Type-C connector\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eETA6096\u003c\/strong\u003e\u003cbr\u003eHigh-efficiency Lithium battery recharge manager\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMP28164\u003c\/strong\u003e\u003cbr\u003eHigh-efficiency DC-DC buck-boost chip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBOOT button\u003c\/strong\u003e\u003cbr\u003ePress it when resetting to enter download mode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn-board flash memory\u003c\/strong\u003e\u003cbr\u003e4MB: W25Q32JVSSIQ\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRESET button\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRP2350A\u003c\/strong\u003e\u003cbr\u003eDual-core and dual-architecture design, up to 150 MHz operating frequency\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery header\u003c\/strong\u003e\u003cbr\u003eMX1.25 header, for a 3.7V Lithium battery, allows recharging the battery and powering the board at the same time\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePinout\u003c\/strong\u003e\u003cbr\u003eCompatible with Raspberry Pi Pico 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB test points\u003c\/strong\u003e\u003cbr\u003eConnecting to the USB interface\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBOOT test point\u003c\/strong\u003e\u003cbr\u003eConnecting to the BOOT button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDEBUG points\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.waveshare.com\/wiki\/RP2350-Plus\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"RP2350-Plus Schematic diagram\" href=\"https:\/\/files.waveshare.com\/wiki\/RP2350-Plus\/RP2350_Plus.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePinout\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/RP2350-Plus_features.jpg?v=1733914902\"\u003e\u003c\/p\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003ch3\u003eRP2350-Plus\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x RP2350-Plus\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRP2350-Plus with Headers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x RP2350-Plus with Headers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Waveshare","offers":[{"title":"Board Only","offer_id":50847095324945,"sku":"WAV-29370","price":5.7,"currency_code":"USD","in_stock":false},{"title":"With Pre-Soldered Headers","offer_id":50847095357713,"sku":"WAV-29371","price":6.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6285\/6209\/files\/waveshare-rp2350-plus-waveshare-wav-29370-72686224277889.jpg?v=1735206656","url":"https:\/\/abcd3032.myshopify.com\/hi\/products\/waveshare-rp2350-plus","provider":"Tayyab Zak","version":"1.0","type":"link"}