{"product_id":"firebeetle-2-esp32-c6-iot-development-board","title":"FireBeetle 2 ESP32 C6 IoT Development Board","description":"\u003cp\u003e\u003cspan\u003eThe FireBeetle 2 ESP32-C6 IoT is built around the powerful ESP32-C6 chip, it features a 160MHz RISC-V 32-bit processor and supports multiple communication protocols such as Wi-Fi 6, Bluetooth 5, Zigbee 3.0, and Thread 1.3, providing seamless integration into diverse IoT networks. The board offers various power supply options, including Type-C, 5V DC, and solar charging for lithium batteries, managed by a solar power manager for optimised energy use. This flexibility allows for well-run energy management and a range of deployment choices. The inclusion of Wi-Fi 6 provides lower latency and reduced power consumption, while solar charging capabilities allow for deployment in areas without power lines. Additionally, the board features battery level detection, providing real-time monitoring of the device's battery status.\u003c\/span\u003e\u003c\/p\u003e \u003ch2\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e\u003cspan\u003eEquipped with the ESP32-C6 chip, it supports communication protocols including Wi-Fi, BLE, Zigbee, and Thread.\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eSupports Wi-Fi 6 protocol for lower latency and lower power consumption.\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eSolar charging enables deployment without the need for power lines.\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eBattery level detection allows monitoring of device battery information.\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eUltra-low power consumption with deep sleep at 16uA.\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eOnboard GDI interface for easy connection to screens.\u003c\/span\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003e\u003cspan\u003eWhat's on Board\u003c\/span\u003e\u003c\/h2\u003e \u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/FireBeetle_2_ESP32_C6_IoT_Development_Board_features_1.jpg?v=1715862012\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003cspan\u003e\u003cstrong\u003eType-C\u003c\/strong\u003e: Type-C USB port\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003e\u003cstrong\u003eIO15\/D13\u003c\/strong\u003e: Onboard LED pin\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\n\u003cspan\u003e\u003cstrong\u003eCharge\u003c\/strong\u003e: Charging indicator\u003c\/span\u003e \u003cul\u003e \u003cli\u003e\u003cspan\u003eOff: not plugged in the power supply or fully charged\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eOn: charging\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eBlinking: battery not connected\u003c\/span\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003e\u003cspan\u003e\u003cstrong\u003eRST\u003c\/strong\u003e: Reset button\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003e\u003cstrong\u003eIO9\/D9\/BOOT\u003c\/strong\u003e: GPIO9 \/ Boot button\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/dfimg.dfrobot.com\/5d57611a3416442fa39bffca\/wiki\/6f630301d84caf0e92266e3c5cf11edc.PDF\"\u003e\u003cstrong\u003eHM6245\u003c\/strong\u003e\u003c\/a\u003e: 3.3V Low power LDO\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003e\u003cstrong\u003eBAT\u003c\/strong\u003e: Lithium-ion battery or lithium polymer battery interface\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003e\u003cstrong\u003eIO0\u003c\/strong\u003e: Battery voltage detection pin\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/dfimg.dfrobot.com\/5d57611a3416442fa39bffca\/wiki\/85759bb076bf6bb24fd8ca5683f19603.pdf\"\u003e\u003cstrong\u003eCN3165\u003c\/strong\u003e\u003c\/a\u003e: Solar management chip\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003e\u003cstrong\u003eGDI\u003c\/strong\u003e: GDI display interface\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/dfimg.dfrobot.com\/5d57611a3416442fa39bffca\/wiki\/5eeffd974782b6cc442f7a2ee7f00577.pdf\"\u003e\u003cstrong\u003eESP32-C6\u003c\/strong\u003e\u003c\/a\u003e: ESP32-C6FH4 chip\u003c\/span\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003e\n\u003cspan\u003eSpecifications\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003eBasic Parameters\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eOperating Voltage: 3.3V\u003c\/li\u003e \u003cli\u003eType-C Input Voltage: 5V DC\u003c\/li\u003e \u003cli\u003eVCC Input Voltage: 5V DC or 4.5-6V Solar Panel\u003c\/li\u003e \u003cli\u003eMax Charging Current: 0.5A\u003c\/li\u003e \u003cli\u003eSleep current: 16uA (in deep sleep mode, powered by battery)\u003c\/li\u003e \u003cli\u003eOperating Temperature: -10~60℃\u003c\/li\u003e \u003cli\u003eDimension: 25.4 x 60mm\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eHardware Information\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eProcessor: RISC-V single-core processor\u003c\/li\u003e \u003cli\u003eMain Frequency: 160 MHz\u003c\/li\u003e \u003cli\u003eSRAM: 512KB\u003c\/li\u003e \u003cli\u003eROM: 320KB\u003c\/li\u003e \u003cli\u003eFlash: 4MB\u003c\/li\u003e \u003cli\u003eRTC SRAM: 16KB\u003c\/li\u003e \u003cli\u003eUSB: USB 2.0 CDC\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eWifi\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eWIFI Protocol: IEEE 802.11b\/g\/n\u003c\/li\u003e \u003cli\u003eIEEE 802.11ax (20 MHz-only non-AP mode)\u003c\/li\u003e \u003cli\u003eBandwidth: Support 20 MHz and 40 MHz at 2.4 GHz band\u003c\/li\u003e \u003cli\u003eWIFI Mode: Station, SoftAP, SoftAP+Station combined mode\u003c\/li\u003e \u003cli\u003eWIFI Frequency: 2.4GHz\u003c\/li\u003e \u003cli\u003eFrame Aggregation: TX\/RX A-MPDU, TX\/RX A-MSDU\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eBluetooth\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eBluetooth Protocol: Bluetooth 5, Bluetooth mesh\u003c\/li\u003e \u003cli\u003eBluetooth Frequency: 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eIEEE 802.15.4\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCompatible with IEEE 802.15.4-2015 protocol\u003c\/li\u003e \u003cli\u003eFrequency band: 2.4GHz\u003c\/li\u003e \u003cli\u003eData rate: 250Kbps\u003c\/li\u003e \u003cli\u003eSupports Thread 1.3 and Zigbee 3.0\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003ePorts\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDigital I\/O x19\u003c\/li\u003e \u003cli\u003eLED PWM 6 Channel\u003c\/li\u003e \u003cli\u003e1x SPI\u003c\/li\u003e \u003cli\u003e3x UART (1x LP UART)\u003c\/li\u003e \u003cli\u003e2x I2C (LP I2C x1)\u003c\/li\u003e \u003cli\u003e1x I2S\u003c\/li\u003e \u003cli\u003e5x IR Transceiver: transmit channel, 5x receive channel\u003c\/li\u003e \u003cli\u003e1x 12-bit SAR ADC, 7-Channel\u003c\/li\u003e \u003cli\u003e3x DMA Controller: transmit channel, 3x receive channel\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eConnection Example - 3.7V Li-Po Battery \u0026amp; Solar Panel\u003c\/h2\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/FireBeetle_2_ESP32_C6_IoT_Development_Board_contents_1.jpg?v=1715862012\" alt=\"\"\u003e\u003c\/p\u003e \u003ch2\u003eResources\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/wiki.dfrobot.com\/SKU_DFR1075_FireBeetle_2_Board_ESP32_C6\" target=\"_blank\" previewlistener=\"true\" rel=\"noopener\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/dfimg.dfrobot.com\/5d57611a3416442fa39bffca\/wiki\/5eeffd974782b6cc442f7a2ee7f00577.pdf\" target=\"_blank\" previewlistener=\"true\" rel=\"noopener\"\u003eESP32-C6 Chip Datasheet\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/dfimg.dfrobot.com\/5d57611a3416442fa39bffca\/wiki\/65df25004a7d1e8bc128894c75ce4089.pdf\" target=\"_blank\" previewlistener=\"true\" rel=\"noopener\"\u003eSchematics\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/dfimg.dfrobot.com\/5d57611a3416442fa39bffca\/wiki\/fc5aabe8620a8c9519643a7e8c997ecb.pdf\" target=\"_blank\" previewlistener=\"true\" rel=\"noopener\"\u003eDimension\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/dfimg.dfrobot.com\/5d57611a3416442fa39bffca\/wiki\/85759bb076bf6bb24fd8ca5683f19603.pdf\" target=\"_blank\" previewlistener=\"true\" rel=\"noopener\"\u003eCN3165 Chip Datasheet\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/dfimg.dfrobot.com\/5d57611a3416442fa39bffca\/wiki\/6f630301d84caf0e92266e3c5cf11edc.PDF\" target=\"_blank\" previewlistener=\"true\" rel=\"noopener\"\u003eHM6245 Chip Datasheet\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/dfimg.dfrobot.com\/5d57611a3416442fa39bffca\/wiki\/e98b6467f3636d6d33c8d894b29bad89.zip\" target=\"_blank\" previewlistener=\"true\" rel=\"noopener\"\u003eFireBeetle2 Shell stl file\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePinout\u003c\/h3\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/FireBeetle_2_ESP32_C6_IoT_Development_Board_description_2.jpg?v=1715862693\" alt=\"\"\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePower: Power pin \u003cul\u003e \u003cli\u003eVIN: 5V DC or 4.5-6V Solar Panel\u003c\/li\u003e \u003cli\u003e3V3: 3.3V stable output\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eGND: Common ground pin\u003c\/li\u003e \u003cli\u003eGPIO: ESP32 default GPIO number\u003c\/li\u003e \u003cli\u003eArduino: FirebBeetle 2 ESP32-C6 GPIO mapping in Arduino\u003c\/li\u003e \u003cli\u003eADC: ESP32 default analog-to-digital conversion pin\u003c\/li\u003e \u003cli\u003eI2C: I2C interface \u003cul\u003e \u003cli\u003eFirebBeetle 2 ESP32-C6 I2C mapping in Arduino\u003c\/li\u003e \u003cli\u003eLP_SDA\/SCL: Low power I2C pin\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eUART: UART interface \u003cul\u003e \u003cli\u003eLP_TX\/RX: Low-power UART pin\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eSPI: FirebBeetle 2 ESP32-C6 SPI mapping in Arduino\u003c\/li\u003e \u003cli\u003eSDIO: ESP32 default SDIO pin\u003c\/li\u003e \u003cli\u003eJTAG: Debug interface\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003ePackage Contents\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1x FireBeetle 2 Board ESP32 C6 Microcontroller\u003c\/li\u003e \u003cli\u003e2x 20-pin 2.54mm Pin Header\u003c\/li\u003e \u003c\/ul\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":50847371723025,"sku":"DFR1075","price":5.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6285\/6209\/files\/firebeetle-2-esp32-c6-iot-development-board-dfrobot-dfr1075-42204626845891.jpg?v=1735211837","url":"https:\/\/abcd3032.myshopify.com\/products\/firebeetle-2-esp32-c6-iot-development-board","provider":"Tayyab Zak","version":"1.0","type":"link"}