{"product_id":"rp2040-zero-development-board","title":"RP2040 Zero Development Board","description":"\u003cp\u003eThis is a practical and affordable microcontroller board with plenty of features to get you started on your next project! It has an onboard DVI interface, a \u003ca href=\"\/ru\/products\/sandisk-microsd-card-class-10-a1\"\u003eTF card slot\u003c\/a\u003e, and a PIO-USB port. This board is also compatible with the \u003ca href=\"\/ru\/collections\/raspberry-pi-store\"\u003eRaspberry Pi\u003c\/a\u003e 40-pin GPIO header. The board uses the RP2040 microcontroller chip, equipped with a dual-core ARM Cortex M0+ processor. This processor can operate up to a maximum of 133 MHz. For memory, it has 264KB of SRAM and 16MB of flash memory, providing decent capacity for various tasks.\u003c\/p\u003e\n\u003cp\u003eWith its onboard DVI interface, it enables it to connect with many HDMI screens that support DVI. Additionally, the board's PIO-USB port allows it to function both as a USB host and a slave, providing flexibility in connecting with different devices. It also supports multiple programming environments, and is compatible with C\/C++, MicroPython, and Arduino, providing flexibility for people with different programming preferences.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRP2040 microcontroller chip designed by Raspberry Pi\u003c\/li\u003e\n\u003cli\u003eDual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz\u003c\/li\u003e\n\u003cli\u003e264KB of SRAM, and 16MB of onboard Flash memory\u003c\/li\u003e\n\u003cli\u003eOnboard DVI interface can drive most HDMI screens (DVI compatibility required)\u003c\/li\u003e\n\u003cli\u003eSupports use as a USB host or slave via onboard PIO-USB port\u003c\/li\u003e\n\u003cli\u003eOnboard TF card slot for reading and writing TF card\u003c\/li\u003e\n\u003cli\u003eOnboard \u003ca href=\"\/ru\/search?q=lipo+battery\u0026amp;narrow_by=\u0026amp;sort_by=relevency\u0026amp;page=1\"\u003eLithium battery\u003c\/a\u003e recharge\/discharge header, suitable for mobile scenarios\u003c\/li\u003e\n\u003cli\u003eUSB 1.1 with device and host support\u003c\/li\u003e\n\u003cli\u003eDrag-and-drop programming using mass storage over USB\u003c\/li\u003e\n\u003cli\u003eLow-power sleep and dormant modes\u003c\/li\u003e\n\u003cli\u003e2x SPI, 2x I2C, 2x UART, 4x 12-bit ADC, 16x controllable PWM channels\u003c\/li\u003e\n\u003cli\u003eAccurate clock and timer on-chip\u003c\/li\u003e\n\u003cli\u003eTemperature sensor\u003c\/li\u003e\n\u003cli\u003eAccelerated floating-point libraries on-chip\u003c\/li\u003e\n\u003cli\u003e8x Programmable I\/O (PIO) state machines for custom peripheral support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.waveshare.com\/wiki\/RP2040-PiZero\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/files.waveshare.com\/wiki\/RP2040-PiZero\/RP2040-PiZero-Schematic.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePinout\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/RP2040_development_board_features_1.jpg?v=1705406426\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Type-C Connector\u003c\/strong\u003e\u003cbr\u003eFor communication and program burning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePIO-USB port\u003c\/strong\u003e\u003cbr\u003eFor use as a USB host or slave via PIO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVI interface (Mini HDMI connector)\u003c\/strong\u003e\u003cbr\u003eFor driving a DVI screen with an HDMI cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTF Card Slot\u003c\/strong\u003e\u003cbr\u003eSPI Interface Communication\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRP2040\u003c\/strong\u003e\u003cbr\u003eDual-core processor, up to 133MHz Operating Frequency\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eW25Q128JV\u003c\/strong\u003e\u003cbr\u003e16MB NOR-Flash\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRUN Button\u003c\/strong\u003e\u003cbr\u003eReset Button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBOOT Button\u003c\/strong\u003e\u003cbr\u003ePress it when resetting to enter download mode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLithium Battery Header\u003c\/strong\u003e\u003cbr\u003ePH2.0 header, for connecting a 3.7V Lithium battery, allows recharging\/discharging the battery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40-Pin GPIO Header\u003c\/strong\u003e\u003cbr\u003eCompatible with some Raspberry Pi HATs\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDebug Interface\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x RP2040 \u003cspan\u003eZero Development Board\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":50847388827921,"sku":"WAV-25506","price":9.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6285\/6209\/files\/rp2040-zero-development-board-the-pi-hut-wav-25506-42087367475395.jpg?v=1735212299","url":"https:\/\/abcd3032.myshopify.com\/ru\/products\/rp2040-zero-development-board","provider":"Tayyab Zak","version":"1.0","type":"link"}