{"product_id":"case-for-raspberry-pi-5-and-active-cooler","title":"Case for Raspberry Pi 5 and Active Cooler","description":"\u003cp\u003eWe wanted a case that really showed off the guts of our \u003ca href=\"\/zh\/products\/raspberry-pi-5\"\u003eRaspberry Pi 5\u003c\/a\u003e and \u003ca href=\"\/zh\/products\/active-cooler-for-raspberry-pi-5\"\u003eActive Cooler\u003c\/a\u003e setup. Sure we have some great \u003ca href=\"\/zh\/collections\/raspberry-pi-5-cases\"\u003eRaspberry Pi 5 cases\u003c\/a\u003e on offer, but none of them let us see all the juicy hardware as we wanted. So we fired up the laser machine...\u003c\/p\u003e\n\u003cp\u003eThis is our very own case for the Raspberry Pi 5 and Active Cooler, designed and manufactured right here in our UK warehouse. We took everything we learnt from our previous laser-cut Raspberry Pi cases and added some improvements whilst we were a it.\u003c\/p\u003e\n\u003cp\u003eVentilation and port access was our main priority, with cut-outs to accommodate the Active Cooler's airflow, as well as SD, power button and all-other port access. We also added new slots to pass cables just under the lid - great for \u003ca href=\"\/zh\/products\/thepihuts-jumper-bumper-pack-120pcs-dupont-wire\"\u003eGPIO jumper wires\u003c\/a\u003e, UART cables from your \u003ca href=\"products\/raspberry-pi-debug-probe\"\u003eDebug Probe\u003c\/a\u003e, \u003ca href=\"\/zh\/products\/rtc-battery-for-raspberry-pi-5\"\u003eRTC battery\u003c\/a\u003e wires and \u003ca href=\"\/zh\/products\/camera-adapter-cable-for-raspberry-pi-5\"\u003ecamera\u003c\/a\u003e or \u003ca href=\"\/zh\/products\/display-adapter-cable-for-raspberry-pi-5\"\u003edisplay\u003c\/a\u003e cables. Rubber feet are also included.\u003c\/p\u003e\n\u003cp\u003eCurrently available in all-clear or matt black with a glass-look top - \u003cem\u003eswish!\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/zh\/blogs\/raspberry-pi-tutorials\/assembly-guide-for-the-raspberry-pi-5-active-cooler-case\"\u003e\u003cem\u003eClick here to go to the assembly guide for this case.\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAssembly required (we think it's fun and rewarding, some disagree!)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRemove protective film prior to assembly\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRaspberry Pi 5 and Active Cooler not included\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eThermal Performance\u003c\/h2\u003e\n\u003cp\u003eWe ran a stress test of the Raspberry Pi 5 using this case (with Active Cooler) in our office environment (23°) to check thermal performance - the temperature maxed out at around 68°, far from the CPU throttling temperature.\u003c\/p\u003e\n\u003cp\u003eYour mileage may vary depending on your local ambient temperature and use-case of course - however we don't see many projects working the Pi 5 any harder than the stress test!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eAccommodates the Raspberry Pi 5 Active Cooler\u003c\/li\u003e\n\u003cli\u003eVentilation designed for Active Cooler airflow\u003c\/li\u003e\n\u003cli\u003ePower button access \u003cem\u003e(just enough for the edge of your finger, or our fav, the back of a pen!)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eAccess to USB-C, HDMI x2, USB, Ethernet and MicroSD ports\u003c\/li\u003e\n\u003cli\u003eUnder-lid pass-through slots for GPIO, RTC and UART cables\u003c\/li\u003e\n\u003cli\u003eLED indicator cut-out for visibility\u003c\/li\u003e\n\u003cli\u003eUnderside ventilation\u003c\/li\u003e\n\u003cli\u003eSoft rubber feet included \u003cem\u003e(we even engrave rings to show you where to put them!)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eAvailable in all-clear or matt black with a glass-look top\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/zh\/blogs\/raspberry-pi-tutorials\/assembly-guide-for-the-raspberry-pi-5-active-cooler-case\"\u003eAssembly guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLaser-cut Perspex Case Panels\n\u003cul\u003e\n\u003cli\u003e1x Lid\u003c\/li\u003e\n\u003cli\u003e1x Base\u003c\/li\u003e\n\u003cli\u003e4x Side panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFixings pack\u003c\/li\u003e\n\u003cli\u003eRubber Feet (4)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and Active Cooler not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"The Pi Hut","offers":[{"title":"Clear","offer_id":50847472582929,"sku":"TPH-076-CLR","price":9.0,"currency_code":"USD","in_stock":false},{"title":"Black\/Glass","offer_id":50847472615697,"sku":"TPH-076-BLK","price":9.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/6285\/6209\/files\/case-for-raspberry-pi-5-and-active-cooler-the-pi-hut-tph-076-clr-41785904136387.jpg?v=1735213621","url":"https:\/\/abcd3032.myshopify.com\/zh\/products\/case-for-raspberry-pi-5-and-active-cooler","provider":"Tayyab Zak","version":"1.0","type":"link"}