Waveshare
1.69" LCD Display Module (240x280)
1.69" LCD Display Module (240x280)
Обычная цена
$9.00 USD
Обычная цена
Цена со скидкой
$9.00 USD
Цена за единицу
за
Не удалось загрузить сведения о доступности самовывоза
This 1.69" LCD IPS module is a great way to add a small display to your project.
The display has a 240x280 resolution, and offers 262K RGB colours, to give a clear and vibrant display. The module is controlled via a simple 4-wire SPI interface thanks to the embedded ST7789V2 driver.
The handy mounting holes make it easy to incorporate into a custom panel or 3D printed enclosure, and the online development resources make it easy to get up and running on a Raspberry Pi, Arduino board, and an STM32.
A GH1.25 20cm 8-pin cable is included, ready to connect to your favourite microcontroller.
Connection Example: 1.69inch LCD Display Module connected to the Raspberry Pi
Features
- 240×280 resolution, 262K colours, clear and colourful displaying effect
- SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Arduino/STM32
- Comes with online development resources (examples for Raspberry Pi/Arduino/STM32)
Specifications
| Operating Voltage | 3.3V / 5V |
| Communication Interface | 4-wire SPI |
| Display Panel | IPS |
| Driver | ST7789V2 |
| Resolution | 240 × 280 pixels |
| Display Size | 27.97 × 32.63mm |
| Pixel Size | 0.11655 × 0.11655mm |
| Module Size | 31.50 × 39.00mm |
Resources
Pinout
| VCC | Power (3.3V / 5V input) |
| GND | Ground |
| DIN | SPI data input |
| CLK | SPI clock input |
| CS | Chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | Reset, low active |
| BL | Backlight |
Package Contents
- 1x 1.69" LCD Module
- 1x GH1.25 20cm 8-pin cable
